The KOBO range of elastomeric couplings are fully interchangeable with standard couplings
used throughout all industry.
The KOBO range of elastomeric couplings are fully interchangeable with standard couplings
used throughout all industry. The couplings consist of two cast iron hubs which are connected
by an elastomeric six leg spider (flexible component). They are available in eight sizes.
The flexible element can accomodate a higher degree of misalignment.
Parallel missalignment upto 0.5mm
Axial misalignment upto 1.7mm
Because of their superior design KOBO – HRC Couplings can accommodate larger shaft sizes
which makes them a more economical proposition.
ECONOMY
The design has been optimised so that the power capacities are balanced to the appropriate
shaft diameters utilising taper bore fixings.
RESILIENCE
Transient peak loads are reduced by a flexible component, deflection of which is a prime
design consideration.
MISALIGNMENT
Incidental parallel, angular and axial displacement of the connected shafts can be accomodated
INSTALLATION
Quick and easy without special tools, only an allen key is required.
MAINTENANCE
Virtually eliminated and no lubrication required.
ENVIRONMENT
The elastomeric component makes the coupling suitable for use in most conditions
with a temperature range of -40C TO +100C.
POSITIVE
In the unlikely event of the flexible component being destroyed, the drive will be maintained
by the interaction of dogs which are integral with the flanges.
Please click on the links below for technical information